Shape compatible with and suitable for standard busbar connection to other devices of the P-series
Twin-purpose terminal (lift/open-mouthed) above and below
Busbar positioning options (above or below)
Free terminal space despite installed busbar
Universal tripping signal switch, also suitable for PLS., PKN., Z-A. can be subsequently mounted
Auxiliary switch Z-HK can be subsequently mounted
Contact position indicator red - green
Delayed types suitable for use with standard fluorescent lamps, with or without electronic ballast (30mA-RCD: 30 units per
phase conductor, 100mA-RCD: 90 units per phase conductor). NB: If fluorescent lamps with electronic ballasts are used, more than 30/90 units can be switched but exactly how many depends on the make of the ballast. It is recommended to distribute these ballasts evenly across all phases and to follow the instructions of the ballast manufacturer.
The device functions irrespective of the position of installation
Tripping is line voltage-independent. Consequently, the RCD is suitable for “fault current/residual current protection” and “additional protection” within the the meaning of the applicable installation rules
Mains connection at either side
The 4-pole device can also be used for 3-pole connection. For this purpose use terminals 1-2, 3-4, and 5-6 (+ cable link).
The 4-pole device can also be used for 2-pole connection. For this purpose use terminals 5-6 and N-N.
Frame size 45m
Device height 80mm
Device width 35 mm (2MU), 70 mm (4MU)
Mounting quick fastening with 2 lock-in positions on DIN rail IEC/EN 60715
Degree of protection, built-in IP40
Deg. of prot. in moisture-proof encl. IP54
Upper and lower terminals open mouthed/lift terminals
Terminal protection finger and hand touch safe, BGV A3, ÖVE-EN 6
Terminal capacity 1.5 - 35 mm2 single wire 2 x 16 mm2 multi wire
Busbar thickness 0.8 - 2 mm
Tripping temperature -25°C to +40°C
Resistance to climatic conditions acc. to IEC/EN 61008
